You’ve sourced the quotes. The start date is locked in. But have you actually seen the insurance certificates? Most UK homeowners assume a quote implies cover. It doesn’t. At HireAnything we’ve audited hundreds of bookings. The gap between ‘insured’ and ‘properly covered’ is where budgets bleed.
This checklist cuts through the jargon. We’ll show you what to demand, what the minimums look like in pounds sterling, and where the liability traps hide.
Why Your Standard Home Policy Won’t Save You
Standard buildings insurance typically excludes liability arising from contractors working on your property. If a roofer drops a tile through a conservatory roof, or a sparky triggers a fire in the consumer unit, your insurer may deny the claim. The contractor’s policy must respond first. If they lack cover, or their limit is exhausted, the legal spotlight swings to you — the hirer.
Under the Consumer Rights Act 2015, the service must be carried out with reasonable care and skill. But that Act doesn’t mandate insurance. It’s on you to verify it.
The £5 Million Baseline
Public Liability (PL) is non-negotiable. The industry standard minimum is £5 million. Anything less — £1m or £2m — leaves a massive hole on a serious injury claim. Legal costs alone on a catastrophic injury can hit £500k before damages are calculated.
- Minimum acceptable: £5,000,000 Public Liability.
- Preferred for structural/high-risk: £10,000,000.
- Check the expiry date. Policies lapse. A certificate from January 2025 is useless for a July 2026 job.
Public Liability vs Professional Indemnity: The Critical Difference
PL covers bodily injury and third-party property damage caused by the work. Professional Indemnity (PI) covers design errors, specification failures and bad advice. If your builder draws up the steel calculations for a knock-through and gets the loadings wrong, that’s a PI claim. PL won’t touch it.
When Do You Need Professional Indemnity?
- Architects, structural engineers, building surveyors — always.
- Builders offering ‘design and build’ packages.
- Any tradesperson specifying materials or methods that deviate from Building Regs approved documents.
Typical PI limits start at £250,000 but £500,000 to £1 million is standard for firms handling structural design. Cost to the tradesperson? Roughly £300–£800 per year depending on turnover. Cheap peace of mind.
The Subcontractor Blind Spot
Main contractor turns up. Lovely. But the plumber, the plasterer, the scaffolder? They’re often subbies. If the main contractor’s policy doesn’t extend to ‘bona fide subcontractors’ (BFSC), you have zero cover for their mistakes.
Ask for the Subcontractor Insurance Verification process. Do they collect certificates before each job? Do they enforce a Waiver of Subrogation? That waiver stops the subbie’s insurer chasing the main contractor (or you) after paying a claim. It keeps the liability chain clean.
Quick Verification Checklist (Screenshot This)
- Current PL certificate (£5m+), in date, name matches quote.
- PI certificate if design input exists.
- Employers’ Liability (EL) — legal minimum £10m. Covers their staff injury.
- Contractors All Risks (CAR) policy — covers the works themselves, materials on site, hired-in plant.
- Subcontractor schedule with their PL/EL certificates attached.
Homeowner Liability: Contractor Injury On Your Land
This catches everyone out. A roofer falls through a fragile roof light. He sues you under the Occupiers’ Liability Act 1957 for failing to ensure the premises were reasonably safe. Your home insurance might cover this under ‘occupiers liability to contractors’, but many policies cap it at £100k or exclude it entirely if the contractor is deemed ‘in control’ of the area.
Mitigation: Ensure the contractor’s RAMS (Risk Assessment Method Statements) explicitly address the specific hazards of your property. Keep a copy. Email it to your insurer before works start. Cost: ten minutes. Value: priceless.
HSE & CDM 2015: The ‘Domestic Client’ Exemption Myth
You are a ‘domestic client’ under CDM 2015. You don’t have the same duties as a commercial developer. But you must not interfere with safety controls. If you direct the roofer to ‘just nip up there quickly without the scaffold’, you just became a duty holder. HSE prosecutes domestic clients. Rare, but it happens.
Contractors All Risks (CAR) — Who Buys It?
CAR covers the physical works: materials, temporary works, the half-built extension. Two options exist:
| Option | Who Pays | Pros | Cons |
|---|---|---|---|
| Joint Names (You + Contractor) | Usually split 50/50 or contractor includes in prelims | Direct claim control, covers your free-issue materials | Admin hassle, premium ~£150-£400 on £200k job |
| Contractor Only | Contractor (built into quote) | Simple, their policy, their excess | You’re a third party to claim, free-issue items excluded |
For anything over £50k contract value, insist on Joint Names. It’s standard on HireAnything verified projects.
Red Flags That Should Make You Walk Away
- “I’ll send it later” — they won’t.
- Certificate name differs from trading name (e.g. ‘John Smith Plumbing’ vs ‘J Smith Building Services Ltd’).
- PL limit of £1m or £2m on a full house renovation.
- No Employers’ Liability certificate displayed (legal requirement if they have staff).
- Refusal to add you as a Joint Insured on CAR policy for high-value works.
What HireAnything Verifies For You
Every supplier on our platform undergoes a document check before they go live. We confirm:
- PL £5m+ in force.
- EL £10m in force.
- PI where applicable.
- Company registration matches insurance entity.
- HSE enforcement notice check (public register).
You still request the PDFs at booking. We just make sure they exist before you waste time chasing quotes.
Frequently Asked Questions
Do I need to tell my home insurer I’m having building work?
Yes. Most policies require notification for structural works over £25k–£50k. Failure to notify can void your buildings cover entirely. Send a quick email with dates, contract value, and contractor PL certificate attached. Takes two minutes.
What if the tradesperson is a sole trader with no employees?
They don’t legally need Employers’ Liability. But they still need £5m Public Liability. And if they bring a mate to help lift a boiler? That mate is an ‘employee’ for EL purposes. Cash-in-hand labour doesn’t remove the duty.
Is Professional Indemnity required for a kitchen fitter?
Only if they’re designing the layout, specifying structural alterations (removing a load-bearing wall), or certifying gas/electric works beyond standard notification. Pure installation? PL covers it. Design input? PI needed.
How much does Contractors All Risks cost on a £150k extension?
Expect £200–£350 for a 6-month joint-names policy. The contractor usually arranges it; you reimburse or split. Always confirm the excess — typically £250–£500 — and who pays it in a claim.
CTA: Don't gamble with liability gaps. Book verified Tradesperson Hire suppliers on HireAnything today — every pro pre-screened for £5m+ Public Liability, valid EL, and compliant RAMS. Get three transparent quotes in minutes.