Right. You're staring at that dated avocado suite. The tiles are cracked. The grout looks like it's seen a war. You need it gone. But here is the trap: buying pro-grade gear for a one-off job burns cash fast. A decent wet saw alone sets you back £400-plus. A diamond core drill? Another £300. Multiply that by the five or six specialist tools a proper strip-out and rebuild demands. Suddenly your budget has evaporated before the first skip arrives.
At HireAnything we've audited hundreds of UK bathroom projects. The pattern is obvious. Smart renovators hire. They pay a fraction of the purchase price, get calibrated kit with current PAT certificates, and hand it back when the dust settles. Below is the definitive list for 2026. Real prices. Real talk.
1. Wet Tile Saw (Bridge or Sliding Table) — The Non-Negotiable
You cannot cut porcelain or large-format stone with a score-and-snap. It chips. It wastes material. It drives you mad. A sliding table wet saw — think Rubi or Sigma — delivers clean, repeatable cuts on 1200mm slabs. Essential for modern large-format trends.
What it costs on HireAnything
- Day rate: £45 – £65
- Week rate: £140 – £190
- Deposit: Typically £150 – £250 (refundable)
Pro tip: Book a machine with a built-in laser guide. Saves hours of marking up. Check the water pump works before you leave the depot; a dry blade ruins expensive porcelain in seconds.
Safety & Compliance
HSE guidance demands RCD protection on 230v tools. Verify the saw has a current PAT sticker. Wear FFP3 mask — silica dust is a silent killer. Suppliers on our platform carry £5M Public Liability Insurance as standard.
2. Diamond Core Drill — Holes Without the Horror
Need a 110mm soil pipe hole through an engineering brick wall? Or a 35mm tap hole in 20mm porcelain? A standard SDS hammer drill walks across the tile. It cracks the glaze. It ruins your morning. Diamond core rigs — wet or dry — cut clean cylinders every time.
Core drill hire cost breakdown
| Config | Day Rate | Best For |
|---|---|---|
| Handheld dry (up to 152mm) | £35 – £50 | Tile, soft block, quick jobs |
| Stand-mounted wet (up to 300mm) | £70 – £110 | Dense concrete, brick, precision |
| Diamond core bits (per size) | £8 – £18 | Consumable — often cheaper to buy |
Pro tip: Rig the stand to the floor with rawl bolts or a vacuum base. A spinning 152mm bit has torque enough to break your wrist. Never freehand a rig-mounted motor.
3. Oscillating Multi-Tool — The Detail King
This is the unsung hero. Flush-cutting door jambs for tile height. Scraping old adhesive off concrete. Cutting copper pipe tight against a joist. Sanding awkward corners. One tool. Dozens of blades. You'll wonder how you ever managed without it.
Multi-tool rental UK rates
- 110v/240v body only: £18 – £28/day
- Blade kits (5-10 pcs): £12 – £20/week
- Starlock/StarlockPlus fitment: Standard on modern hire fleets
Pro tip: Grab a bi-metal plunge blade for pipework, a carbide rasp for adhesive removal, and a segment saw blade for timber. Don't cheap out on blades — they dictate cut quality.
4. SDS Max Demolition Breaker — Strip-Out Muscle
Taking up a solid screed? Removing a cast-iron bath? Chasing channels in blockwork for new pipe runs? An SDS Plus hammer drill will overheat and die. You need an SDS Max breaker — 11kg to 16kg class. Think Hilti TE 1000 or Makita HM1812.
Hire logistics
- Weight: 11kg – 16kg. Factor delivery or a van.
- Day rate: £55 – £85
- Chisel selection: Point, flat, spade, gouge. Confirm inclusion.
- Vibration: Check EAV/ELV values. Rotate operators every 15–20 mins.
Pro tip: Hire a dust extraction shroud attachment. Keeps the site breathable and the client happy. HSE inspectors love seeing on-tool extraction.
5. Laser Level (Cross-Line or Rotary) — Set Out Once, Build Right
Wonky tiles scream "cowboy". A green-beam cross-line laser projects level and plumb lines across the whole room. Visible in bright daylight. Set it on a tripod. Mark your datums. Tile to the line. Job done.
Specs that matter
- Green beam: 4x visibility vs red. Worth the £5/day premium.
- Self-levelling range: ±3° minimum.
- IP rating: IP54 minimum for site grime.
- Cost: £22 – £38/day | £70 – £110/week
Pro tip: Pair with a laser receiver for outdoor drainage falls. Indoor? The beam is plenty visible. Calibrate before every job — drop it once and it's scrap.
The "Bundle & Save" Strategy
Here is where HireAnything changes the game. Most suppliers offer "bathroom renovation kits" — a curated bundle of the above. One delivery. One collection. One invoice. Typical 5-day bundle: Wet saw + Core drill + Multi-tool + Breaker + Laser = £380 – £520. Buying equivalent entry-level pro kit? £2,200+. You do the maths.
Booking 3 to 6 weeks ahead locks peak-season stock (March–June, September–October). It also guarantees PIPA/HSE safety compliance checks are current. Last-minute panic bookings attract premium surcharges — sometimes 30% on top.
Consumer Rights Act 2015: Your Shield
Hiring from a verified HireAnything supplier triggers Section 13 (services performed with reasonable care and skill) and Section 14 (goods fit for purpose). If the saw arrives with a wobbly table, the supplier must replace or refund. No quibble. Keep your hire agreement and photos of any defects. It's your leverage.
Frequently Asked Questions
Do I need a specific licence to hire a core drill or breaker?
No licence required for hire. But PUWER 1998 places a duty on you — the user — to be competent. If you've never run an SDS Max breaker, book a half-day "familiarisation" session with the depot. Most offer them for £40–£60. Cheaper than a broken wrist.
What happens if I damage a hire tool?
Standard hire contracts include a Damage Waiver (usually 10–15% of hire cost). It caps your liability at the deposit amount for accidental damage. Negligence — running a wet saw dry, dropping a laser in a bucket — voids it. Read the Ts&Cs. Photograph the tool on delivery and return.
Can I hire 110v tools for domestic use?
Yes. Most hire fleets are 110v CTE (Centre Tapped Earth) for site safety. You'll need a 3kVA transformer (£8–£12/day) to run off a standard 13A socket. Check your ring main isn't already loaded by a kettle and heater. Tripping the consumer unit mid-cut is annoying.
How far in advance should I book for a May bank holiday project?
Six weeks minimum. May is peak. Wet saws and core rigs vanish first. Use HireAnything to compare verified suppliers, lock the kit, and pay a small deposit. The balance is due on delivery. Simple.
Your bathroom deserves pro results. Your wallet deserves a break. Hit the button below. Compare live quotes from vetted UK depots. Book the kit. Crack on.