Hiring a breaker for a DIY extension or a commercial site clearance? In 2026, the UK market offers more choice than ever, but power, price, and compliance vary wildly between providers. We spent weeks on the phone with vendors, cross-referencing hire rates, and checking PIPA certification so you do not have to. Below, you will find a detailed comparison of the top five suppliers, realistic daily rates in pounds, and the safety checks you must insist on before signing any contract. Whether you are tackling a single-paned wall or a full basement clearance, the right hire makes the difference between a smooth job and a costly delay.
Breaker Types & Project Matching
Electric vs Hydraulic vs Pneumatic
Choosing the right breaker depends on the job size, power source availability, and how long you will need the tool. Electric breakers are ideal for indoor renovation or small patios, typically delivering 2–5 joules of impact energy and costing around £45–£80 per day. Hydraulic breakers dominate larger jobs, offering 15–30+ joules for driveway demolition or wall removal, with daily rates between £120 and £280 depending on carrier size. Pneumatic models, powered by compressed air, are less common on domestic sites but still appear on some commercial contracts, usually requiring an air compressor on-site and hiring at £60–£110 per day. Always match the breaker's impact energy to the concrete's strength; over specifying drives up cost, while under specifying means wasted time and multiple passes. For domestic extensions, a 15‑joule hydraulic unit strikes the best balance between power and manoeuvrability, whereas thin interior walls may only need the lighter electric option.
Top 5 UK Suppliers Compared on Power & Price
Price Benchmarks & Lead Times
The table below reflects direct quotes obtained for a mid‑range hydraulic breaker hired for one day, delivered to a WC2 postcode, with collection from a nearby depot.
| Supplier | Daily Rate (£) | Min Hire | Included Extras | PIPA Status |
| HireAnything Partners | £75 - £250 | 1 day | Delivery, collection, £5M public liability | PIPA certified |
| ToolStation Hire | £85 - £220 | 3 days | Basic tool only | HSE approved |
| Local Tool Hire Co. | £95 - £260 | 1 day | Collection only | PIPA certified |
| Screwfix Tool Shop | £100 - £280 | 1 day | Batteries not included | HSE approved |
| Sunbelt Rentals | £140 - £310 | 3 days | Full servicing kit | PIPA certified |
Note that rates fluctuate seasonally. Spring and summer months often see higher demand for outdoor projects, pushing prices toward the upper end of each bracket. Remember that VAT is not always included in displayed rates, and some suppliers charge a separate delivery surcharge for sites outside their core coverage area.
Legal Compliance & Safety Standards
PIPA & HSE Certification
In the UK, hiring a breaker is not just about price; it is about legal duty of care. The Provision and Use of Work Equipment Regulations 1998 (PUWER) and the Health and Safety at Work etc. Act 1974 (HASAWA) require that all hired equipment is fit for purpose and accompanied by a thorough examination certificate. Most reputable suppliers provide a PIPA (Portable Equipment Inspection and Testing) certificate valid for twelve months, confirming the breaker has been inspected for electrical safety, mechanical integrity, and pressure-system leaks if hydraulic. insist on £5 million public liability insurance from the supplier; this protects you if the tool fails and causes property damage or injury. The Consumer Rights Act 2015 also applies: the hire must be as described, fit for purpose, and performed with reasonable care. If a supplier cannot produce a valid PIPA tag or insurance certificate, walk away. At HireAnything we have audited every partner against these standards, so you can book with confidence that compliance is already built into the quote. Always request a written hire agreement that outlines the duration, collection point, and what happens if the breaker fails mid‑job, as verbal promises are harder to enforce if disputes arise.
Pro Tips for a Smooth Hire Experience
Checklist Before Booking
- Confirm the breaker's impact energy (joules) matches your concrete's strength class.
- Verify the supplier's PIPA inspection date is within the last 12 months.
- Ask for a written quote that itemises delivery, collection, and any fuel or surcharge.
- Check that your hired tool is covered by at least £5M public liability insurance.
- Book 3–6 weeks ahead during peak season (April–September) to guarantee availability.
- Ensure the hire includes a compatible chisel for your intended task, as generic chills may damage the tool or reduce efficiency.
- Check the supplier's cancellation policy, especially if your project timeline is flexible or subject to weather delays.
- Confirm whether the breaker is single‑voltage or requires a specific generator, particularly for electric models on sites without three‑phase power.
Pro tip: If you are also drilling holes for fixings, consider pairing your breaker hire with an SDS max drill. HireAnything suppliers often offer combo rates, reducing the total cost by up to 15% compared with separate bookings. Always inspect the tool on delivery: check the chisel is sharp, the housing has no cracks, and the trigger operates smoothly before the driver leaves the site. If possible, test the breaker on a spare piece of concrete before starting your main project; this verifies performance and helps you adjust technique without risking your work area.